# /etc/inittab: init(8) configuration.
# $Id: inittab,v 1.6 1997/01/30 15:03:55 miquels Exp $

# The default runlevel.
id:3:initdefault:

# Boot-time system configuration/initialization script.
# This is run first except when booting in emergency (-b) mode.
si::sysinit:/etc/rc.d/rc.sysinit

# What to do in single-user mode.
~~:S:wait:/sbin/sulogin

# /etc/init.d executes the S and K scripts upon change
# of runlevel.
#
# Runlevel 0 is halt.
# Runlevel 1 is single-user.
# Runlevels 2-5 are multi-user.
# Runlevel 6 is reboot.

l0:0:wait:/etc/rc.d/rc 0
l1:1:wait:/etc/rc.d/rc 1
l2:2:wait:/etc/rc.d/rc 2
l3:3:wait:/etc/rc.d/rc 3
l4:4:wait:/etc/rc.d/rc 4
l5:5:wait:/etc/rc.d/rc 5
l6:6:wait:/etc/rc.d/rc 6

# Normally not reached, but fallthrough in case of emergency.
#z6:6:respawn:/sbin/sulogin

# What to do when CTRL-ALT-DEL is pressed.
ca:12345:ctrlaltdel:/sbin/shutdown -t1 -r now

# Action on special keypress (ALT-UpArrow).
#kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work."

# What to do when the power fails/returns.
pf::powerwait:/etc/init.d/powerfail start
pn::powerfailnow:/etc/init.d/powerfail now
po::powerokwait:/etc/init.d/powerfail stop

# /sbin/getty invocations for the runlevels.
#
# Format:
#  <id>:<runlevels>:<action>:<process>
1:2345:respawn:/sbin/getty 38400 tty1 -l "/bin/login -f root"
#2:23:respawn:/sbin/getty 38400 tty2

# Example how to put a getty on a serial line (for a terminal)
#
# ttySAx was ttySx
T0:12345:respawn:/sbin/getty -L ttyS0 38400 vt100
#T1:12345:respawn:/sbin/getty -L ttyS1 38400 vt100
#T1:12345:once:/sbin/getty -L ttyS1 38400 vt100
#T2:12345:respawn:/sbin/getty -L ttyS2 38400 vt100

#Example how to run portslave
#
#T0:23:respawn:+/usr/sbin/portslave 0
#T1:23:respawn:+/usr/sbin/portslave 1
#T2:23:respawn:+/usr/sbin/portslave 2
#T3:23:respawn:+/usr/sbin/portslave 3

#Start Cardmgr
CM:23:once:/sbin/cardmgr

# Start Microwindows Demo
#mw:23:respawn:/root/demo
